home *** CD-ROM | disk | FTP | other *** search
- Path: quijote.in-berlin.de!hajo
- Date: 02 Jan 1996 00:00:00 +0000
- From: hajo@quijote.in-berlin.de (Hans-Joachim Zierke)
- Newsgroups: comp.dcom.modems
- Message-ID: <607fM$tpYgB@quijote.in-berlin.de>
- References: <5-62TlW4YgB@quijote.in-berlin.de> <4bi0nm$2p6@mips.pfalz.de>
- <4c5nle$2ii@thias.muc.de> <603aesF4YgB@quijote.in-berlin.de>
- <DKK2v3.2FD@pe1chl.ampr.org>
- Subject: Re: ZyXEL a/b
- X-Newsreader: CrossPoint v3.1 R/C211
- Organization: =?ISO-8859-1?Q?T=FCpfelchen-R=E4cher_GmbH?=
-
-
- Rob Janssen writes:
-
- > >Does the a/b support pulse dialing phones?
- >
- > Yes. Are these still found in Germany?
- > (I read some time ago that there are still analog lines around that only
- > support pulse... over here, about 1.5 years ago the last pulse-only
- > switches were replaced and now everyone can use DTMF or pulse)
-
-
- It is not a question of switches. If a switch supports ISDN, it supports
- DTMF.
-
- The question is wether an a/b supports _devices_ that can't send DTMF
- tones. Or you tell me how my Siemens Bundespost FeTAp with mechanical round
- dialer can be modified for DTMF. ;-)
- These old devices were utterly overpriced, but there won't be any need to
- replace it within the next 20 years most likely.
-
- hajo
-
-